Global Activities
Our activities in the Netherlands
Our headquarters are located in The Netherlands and we serve a lot of clients in our own country. On this page a selection of gearbox projects done in The Netherlands are included. More information about the project can be viewed by clicking on the links listed below.
The Netherlands
January 2013
The Netherlands
January 2013
The Netherlands
January 2013
The conversion operations consists of:
- Disassembling of the PTO shaft out of the gearbox.
- Transporting the gearbox to our workshop.
- Renewing of the bearings.
The Netherlands
December 2012
The Netherlands
December 2012
The Netherlands
December 2012
The Netherlands
December 2012
The Netherlands
December 2012
The Netherlands
December 2012
The Netherlands
December 2012
The Netherlands
November 2012
The Netherlands
November 2012
The Netherlands
November 2012
The Netherlands
November 2012
The conversion operations consists of:
- Disassembling of the gearbox.
- Inspection and revision of the gearbox.
- Renewing of the complete inside box.
The Netherlands
November 2012
The conversion operations consists of:
- Disassembling of the gearbox.
- Inspection and revision of the gearbox.
- Renewing of the complete inside box.
The Netherlands
November 2012
The Netherlands
November 2012
The Netherlands
November 2012
The conversion operations consists of:
- Revision on the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
November 2012
The Netherlands
October 2012
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
October 2012
The Netherlands
October 2012
The Netherlands
October 2012
The Netherlands
September 2012
The conversion operations consists of:
- Inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
September 2012
Disassembling, cleaning and inspection.
Repairing all of the seals and bearings.
Performing a test run.
Repairing all of the seals and bearings.
Performing a test run.
FLENDER K-200K
The Netherlands
January 2013
On gearbox of Kone we performed a revision/inspection.
Seals and bearings were repaired.
After repairing we made a test run-
with a test run report for our client.
Seals and bearings were repaired.
After repairing we made a test run-
with a test run report for our client.
KONE KHV220A-14-25
The Netherlands
January 2013
Performing:
Disassembling ZPMC gearbox.
Checking the axial clearance.
Compete assembly of the gearbox.
Disassembling ZPMC gearbox.
Checking the axial clearance.
Compete assembly of the gearbox.
ZPMC FH1060.35.A2B
The Netherlands
January 2013
- Transporting the gearbox to our workshop.
- Renewing of the bearings.
REINTJES WAF-5555
The Netherlands
December 2012
Repairing all seals and bearings of gearbox WGW KSHK 1330 S/So.
Test run with a test run report.
The repaired gearbox was transported to the client.
Test run with a test run report.
The repaired gearbox was transported to the client.
WGW KSHK 1330 S/So
The Netherlands
December 2012
Disassembling, cleaning and inspection on gearbox Bierens KA55-35.
Revision according to revision proposal.
Making a complete inspection report.
Performing a test run.
Revision according to revision proposal.
Making a complete inspection report.
Performing a test run.
BIERENS KA55-35
The Netherlands
December 2012
We manufactured an gearsegment for the swing of an Bucket wheel excavator.
GBS GEAR SEGMENT
The Netherlands
December 2012
- Performing a visual inspection on 72 jack-up gearboxes with endoscope
- Making complete inspection reports.
- Making revision proposals regarding the damage found inside the gearboxes.
- Making complete inspection reports.
- Making revision proposals regarding the damage found inside the gearboxes.
CFEM 27H6SP
The Netherlands
December 2012
We performed an inspection in gearbox Jahnel Kestermann.
The teeths were slightly damage so we regrind them.
We did repair the bearings and seals.
The teeths were slightly damage so we regrind them.
We did repair the bearings and seals.
JAHNEL KESTERMANN E420 / 800
The Netherlands
December 2012
Performing an inspection on gearbox ZPMC:
- Visual inspection.
- Vibration measurement.
- Visual inspection.
- Vibration measurement.
ZPMC FH1060.35.A2B
The Netherlands
December 2012
Complete inspection on gearbox of ZPMC.
First we disassembled and cleaned it.
We inspected the gearbox for any damage.
Damage was repaired.
The repaired gearbox was transported back to our client.
First we disassembled and cleaned it.
We inspected the gearbox for any damage.
Damage was repaired.
The repaired gearbox was transported back to our client.
ZPMC FB515.916.D1A-00
The Netherlands
November 2012
Performing:
Disassembling and cleaning of gearbox Flender KAD-140.
Inspection and repairing the seals and bearings.
Also performing a test run with a test run report for our client.
Disassembling and cleaning of gearbox Flender KAD-140.
Inspection and repairing the seals and bearings.
Also performing a test run with a test run report for our client.
FLENDER KAD-140
The Netherlands
November 2012
On site on gearbox Flender KF140-VU50-6225-M4:
- Disassembling and inspection.
- Repairing of the seals and assembling the repaired gearbox.
- Disassembling and inspection.
- Repairing of the seals and assembling the repaired gearbox.
FLENDER KF140-VU50-6225-M4
The Netherlands
November 2012
Inspection and cleaning the gearbox.
Repairing the seals and bearings.
At the end we assembled the gearbox and performed a test run.
Repairing the seals and bearings.
At the end we assembled the gearbox and performed a test run.
PIV LB180-12H
The Netherlands
November 2012
- Inspection and revision of the gearbox.
- Renewing of the complete inside box.
RADEMAKERS CSCF-100
The Netherlands
November 2012
- Inspection and revision of the gearbox.
- Renewing of the complete inside box.
RADEMAKERS CSCF-100
The Netherlands
November 2012
- Inspection on gearbox Kuypers 6021-7.
- Installation of this gearbox.
- Test run to check if everything was alright.
- Installation of this gearbox.
- Test run to check if everything was alright.
KUYPERS 6021-7
The Netherlands
November 2012
This gearbox made a strange noise.
Visual inspection on gearbox of Flender.
Gears were damaged and it was leaking oil.
Damage on the gears and the leakage was repaired by our engineers.
Visual inspection on gearbox of Flender.
Gears were damaged and it was leaking oil.
Damage on the gears and the leakage was repaired by our engineers.
FLENDER H3-SH-19
The Netherlands
November 2012
- Performing of the repair constructions.
- Deploying of the inspection report.
MARLEY UNKNOWN
The Netherlands
November 2012
Inspection on gearbox ZPMC TB 340.47.A1B.
Our findings were reported to our client in a complete inspection repot.
Our findings were reported to our client in a complete inspection repot.
ZPMC TB 340.47.A1B
The Netherlands
October 2012
- Performing of the repair constructions.
- Deploying of the inspection report.
REGGIANA PLANETARY GEARB WGF
The Netherlands
October 2012
Lightnin gearbox made a strange noise.
Performing a vibration measurement to check what the problem was.
They found that the gears were slightly damaged.
Performing a vibration measurement to check what the problem was.
They found that the gears were slightly damaged.
LIGHTNIN model-82-THRU-86
The Netherlands
October 2012
We performed an inspection and revision on gearbox HYOSUNG 440-KIPS-SPH80.
The conversion operations consists of:
- Disassembling of the forwardbox.
- Performing of the repair constructions.
- Disassembling and cleaning of the planetary gearbox.
- Renewing of the output shaft bearing.
- Performing of the repair constructions.
- Disassembling and cleaning of the planetary gearbox.
- Renewing of the output shaft bearing.
HYOSUNG 440-KIPS-SPH80
The Netherlands
October 2012
Exchanging and alignment on gearbox DEMAG 20Zw / KF.
DEMAG 20Zw / KF
The Netherlands
September 2012
- Performing of the repair constructions.
- Deploying of the inspection report.
REINTJES WAF-5555
The Netherlands
September 2012