Global Activities
Our activities in the Netherlands
Our headquarters are located in The Netherlands and we serve a lot of clients in our own country. On this page a selection of gearbox projects done in The Netherlands are included. More information about the project can be viewed by clicking on the links listed below.
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stoppoint.
- Performing of the repair constructions.
The Netherlands
August 2013
The conversion operations consists of:
- Performing of a visual and videoscopic inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Performing a vibration measurement.
The Netherlands
August 2013
The conversion operations consists of:
- Visual and videoscopic inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Renewing of all seals.
The Netherlands
August 2013
The conversion operations consists of:
- Making of a complete new casing.
- Assembling and a test run of the gearbox.
- Conserving the gearbox internally and externally.
The Netherlands
August 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
August 2013
The conversion operations consists of:
- A visual inspection for the condition of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Performing a test run.
The Netherlands
August 2013
The conversion operations consists of:
- Renewing of the bearings on location.
- Performing of the repair constructions.
- Disassembling of the first three pinionshafts and transporting to our fitting shop.
- Controlling of the output bearing to the benefit of the output shaft.
The Netherlands
July 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Renewing of the coupling.
The Netherlands
July 2013
The conversion operations consists of:
- A visual and a videoscopic inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Renewing of all bearings.
The Netherlands
July 2013
The conversion operations consists of:
- Disassembling of the topcocer and inspection of the inside gearbox on location.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
July 2013
The Netherlands
July 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
July 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
July 2013
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The Netherlands
June 2013
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The Netherlands
June 2013
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The Netherlands
June 2013
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The Netherlands
June 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
June 2013
The conversion operations consists of:
- A visual inspection of the gearbox with the aid of a videoscope.
- Deploying of the inspection report.
- Stop point.
The Netherlands
June 2013
The conversion operations consists of:
- Measurement and alignment of the gearbox on location.
- Performing of the repair constructions.
- Controlling of the brake disc for oscillation with the aid of a caliber.
The Netherlands
June 2013
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The Netherlands
June 2013
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The Netherlands
June 2013
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The Netherlands
June 2013
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The Netherlands
June 2013
The conversion operations consists of:
- Disassembling of the gearbox with the complete gearwheel on location.
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
The Netherlands
June 2013
- Deploying of the inspection report.
- Stoppoint.
- Performing of the repair constructions.
WGW KSHK 1330 S/So
The Netherlands
August 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
- Performing a vibration measurement.
FLENDER H3-SH-19
The Netherlands
August 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
- Renewing of all seals.
REINTJES WAF-5555
The Netherlands
August 2013
- Assembling and a test run of the gearbox.
- Conserving the gearbox internally and externally.
BHS TG-28
The Netherlands
August 2013
- Deploying of the inspection report.
- Stop point.
FLENDER FZAF108B
The Netherlands
August 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
- Performing a test run.
ZPMC FH1650.82.C1B
The Netherlands
August 2013
- Performing of the repair constructions.
- Disassembling of the first three pinionshafts and transporting to our fitting shop.
- Controlling of the output bearing to the benefit of the output shaft.
PIV JPD75-R11-V25-90
The Netherlands
July 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
- Renewing of the coupling.
PIV JPD75-R11-V25-90
The Netherlands
July 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
- Renewing of all bearings.
FLENDER H3-SH-14
The Netherlands
July 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
HANSEN DM-933-ATS
The Netherlands
July 2013
Our client had a problem with the gearbox JAHNEL & KESTERMANN ASU 560.
We performed:
- Disassembling, inspection and cleaning.
- We assembled the complete gearbox again and performed a rest run with a test run report for our client.
We performed:
- Disassembling, inspection and cleaning.
- We assembled the complete gearbox again and performed a rest run with a test run report for our client.
JAHNEL KESTERMANN ASU 560
The Netherlands
July 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
WGW SN-3/So
The Netherlands
July 2013
- Deploying of the inspection report.
- Stop point.
GRAESSNER GR. 60L
The Netherlands
July 2013
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
The Netherlands
June 2013
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
The Netherlands
June 2013
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
The Netherlands
June 2013
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
The Netherlands
June 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
ZOLLERN ZHP-4.26
The Netherlands
June 2013
- Deploying of the inspection report.
- Stop point.
MASSON MMW-5200
The Netherlands
June 2013
- Performing of the repair constructions.
- Controlling of the brake disc for oscillation with the aid of a caliber.
SVENDBORG BRAKES BSFH-520-R
The Netherlands
June 2013
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
The Netherlands
June 2013
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
The Netherlands
June 2013
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
The Netherlands
June 2013
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
The Netherlands
June 2013
- Transporting the gearbox to our fitting shop.
- Disassembling, cleaning and an inspection of the gearbox with complete gearwheel.
ZPMC FB515.916.D1A-00
The Netherlands
June 2013