Global Activities
Our activities in the Netherlands
Our headquarters are located in The Netherlands and we serve a lot of clients in our own country. On this page a selection of gearbox projects done in The Netherlands are included. More information about the project can be viewed by clicking on the links listed below.
The conversion operations consists of:
- Disassembling and cleaning of the gearbox.
- Performing of the repair constructions.
- Renewing of the seals and bearings.
The Netherlands
December 2013
The Netherlands
December 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
The Netherlands
December 2013
The Netherlands
December 2013
The conversion operations consists of:
- Disassembling and cleaning of the gearbox.
- Performing of the repair constructions.
- Renewing of the seals and bearings.
The Netherlands
December 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Controlling of the toothing for bursts with the aid of magnafluxing.
- Controlling of the tempered parts for bursts with the aid of magnafluxing.
The Netherlands
December 2013
The conversion operations consists of:
- Disassembling and cleaning of the gearbox.
- Performing of the repair constructions.
- Renewing of the seals and bearings.
The Netherlands
December 2013
The conversion operations consists of:
- Disassembling of the inside of the gearbox, the bearings not yet.
- Renewing of all seals and bearings.
- Disassembling and inspection of the input and the output coupling.
The Netherlands
December 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
December 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
December 2013
The Netherlands
December 2013
The conversion operations consists of:
- Inspection of the Motor-reductor.
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
November 2013
The conversion operations consists of:
- Disassembling, cleaning and an inspection of the gearbox.
- Performing of the repair constructions.
- Renewing of the seals and bearings.
The Netherlands
November 2013
The conversion operations consists of:
- Disassembling of the gearbox.
- Performing of the repair constructions.
- Bearingdamages on the gearwheel.
The Netherlands
November 2013
Inside of the box:
- Controlling of the condition of the serrations of all gearings.
- Controlling of the bearings for damages.
- Controlling for the flatness of the contact patterns and the flank backlashes of all gearings.
- Controlling of the shaftsizes in way of the bearings, oilseals and couplings for dimensions and damages.
The Netherlands
November 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Making of a complete new casing.
- Assembling and a test run of the gearbox.
The Netherlands
November 2013
The conversion operations consists of:
- Disassembling and cleaning of the complete gearbox.
- Performing of the repair constructions.
The Netherlands
November 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
The Netherlands
November 2013
The Netherlands
November 2013
The conversion operations consists of:
- Disassembling and cleaning of the complete gearbox.
- Performing of the repair constructions.
The Netherlands
November 2013
The conversion operations consists of:
- Disassembling and cleaning of the complete gearbox.
- Performing of the repair constructions.
The Netherlands
November 2013
The Netherlands
November 2013
-99196-kl-01.jpg)
-99196-kl-02.jpg)
The Netherlands
November 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
November 2013
The Netherlands
November 2013
- Performing of the repair constructions.
- Renewing of the seals and bearings.
WGW KS 5,75/S/So
The Netherlands
December 2013
The follow instructions were produced at the gearbox:
Disassembling and cleaning of the gearbox.
Inspection of the parts consisting of the following instruction:.
PIV PD31-R10-H14
The Netherlands
December 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
MIELE FAKR1-155-S
The Netherlands
December 2013
The follow instructions were produced at the gearbox:
Disassembling and cleaning of the gearbox.
Inspection of the parts consisting of the following instruction:
MIELE FAKR1-155-S
The Netherlands
December 2013
- Performing of the repair constructions.
- Renewing of the seals and bearings.
HANSEN PDC23S-BNN-14,5
The Netherlands
December 2013
- Controlling of the toothing for bursts with the aid of magnafluxing.
- Controlling of the tempered parts for bursts with the aid of magnafluxing.
RADEMAKERS Raplan 275L
The Netherlands
December 2013
- Performing of the repair constructions.
- Renewing of the seals and bearings.
SIEMENS B2-DH-14C
The Netherlands
December 2013
- Renewing of all seals and bearings.
- Disassembling and inspection of the input and the output coupling.
DEMAG 200 ZW/KR
The Netherlands
December 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
HANSEN RLD-33-S-BRH-20
The Netherlands
December 2013
- Deploying of the inspection report.
- Stop point.
EKATO EKF-3V-280-660-KR
The Netherlands
December 2013
This report provides an overview of the findings, obtained during the repair, testing
and installation of the main trolley gearbox.
- All bearings have been renewed.
- All seals have been renewed.
- The gearbox is cleaned internally and externally.
and installation of the main trolley gearbox.
- All bearings have been renewed.
- All seals have been renewed.
- The gearbox is cleaned internally and externally.
ZPMC FH1610.28.C3B-00
The Netherlands
December 2013
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
HYDRO 123
The Netherlands
November 2013
- Performing of the repair constructions.
- Renewing of the seals and bearings.
PIV PD31-R10-H14
The Netherlands
November 2013
- Performing of the repair constructions.
- Bearingdamages on the gearwheel.
SANTASALO 3TKC180NE
The Netherlands
November 2013
- Controlling of the bearings for damages.
- Controlling for the flatness of the contact patterns and the flank backlashes of all gearings.
- Controlling of the shaftsizes in way of the bearings, oilseals and couplings for dimensions and damages.
FLENDER KDA 320
The Netherlands
November 2013
- Making of a complete new casing.
- Assembling and a test run of the gearbox.
BHS TG-28
The Netherlands
November 2013
- Performing of the repair constructions.
FLENDER KDA 320
The Netherlands
November 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
WGW KSHK 1330 S/So
The Netherlands
November 2013
This report provides the findings of the exported visual inspection
and the vibratiuon measurement to the gearbox.
The purpose of the inspection is to determine the condition of the gearbox.
At the inspection of the gearbox is used a videoscope.
and the vibratiuon measurement to the gearbox.
The purpose of the inspection is to determine the condition of the gearbox.
At the inspection of the gearbox is used a videoscope.
ZPMC FH1060.2.24.A2A
The Netherlands
November 2013
- Performing of the repair constructions.
CONRAD STORK 3R 560 S/3
The Netherlands
November 2013
- Performing of the repair constructions.
CONRAD STORK 3R 560 S/3
The Netherlands
November 2013
Revisionconstruction and supply comprehensive:
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
Gearbox casing:
- A visual inspection of the gearbox casing for bursts.
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
FLENDER ZF148K-IEC250
The Netherlands
November 2013
Revisionconstruction and supply comprehensive:
- Disassembling and cleaning of the gearbox on location.
- Inspection of all parts of the gearbox:
Gearbox casing:
- A visual inspection of the gearbox casing for bursts.
- Disassembling and cleaning of the gearbox on location.
- Inspection of all parts of the gearbox:
FLENDER ZF68-K2-(100)
The Netherlands
November 2013
- Deploying of the inspection report.
- Stop point.
FLENDER FZAF108B
The Netherlands
November 2013
Revisionconstruction and supply comprehensive:
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
FLENDER KBH 400/S/So
The Netherlands
November 2013