Global Activities
Our activities in the Netherlands
Our headquarters are located in The Netherlands and we serve a lot of clients in our own country. On this page a selection of gearbox projects done in The Netherlands are included. More information about the project can be viewed by clicking on the links listed below.
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Controlling the gearings for bursts by means of magnafluxing.
The Netherlands
January 2014
The conversion operations consists of:
- Disassembling, cleaning and a visual inspection of the gearbox.
- Performing of the repair constructions.
- Renewing of all seals and bearings.
- Renewing of the output shaft.
The Netherlands
January 2014
The conversion operations consists of:
- Disassembling and cleaning of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
The Netherlands
January 2014
The conversion operations consists of:
- Disassembling and cleaning of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
The Netherlands
January 2014
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
The Netherlands
January 2014
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
The Netherlands
January 2014
The conversion operations consists of:
- Interchanging of the gearbox.
- Performing of the repair constructions.
- Construction of the Malmedie coupling.
The Netherlands
January 2014
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
The Netherlands
January 2014
The conversion operations consists of:
- Inspection of the disassembled bow thruster gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
January 2014
Gearbox casing
- Inside box was in poor condition, we had to scrape, to polish,
to degrease and to conserve in the excisting colour.
- Outside box was in poor condition.
The Netherlands
January 2014
Gearbox casing
- The inside conservation was in poor condition. We had to scrape,
to degrease and to conserve in the excisting colour.
The Netherlands
January 2014
The follow instructions were produced at the gearbox:
The Netherlands
January 2014
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
The Netherlands
January 2014
The conversion operations consists of:
- Disassembling of the gearbox.
- Modifying of the gearbox.
- Performing of the repair constructions.
- Assembling of the input coupling and output cable drum.
The Netherlands
January 2014
The Netherlands
December 2013
The Netherlands
December 2013
The Netherlands
December 2013
The conversion operations consists of:
- Disassembling and cleaning of the gearbox.
- Performing of the repair constructions.
- Renewing of the seals and bearings.
- Re-assembling of the gearbox.
The Netherlands
December 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Renewing og all seals, bearings and innerrings.
- Renewing of diverse small items such as gaskets and bolts.
The Netherlands
December 2013
The Netherlands
December 2013
The conversion operations consists of:
- Performing of an inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
December 2013
The conversion operations consists of:
- Disassembling of the gearbox on location.
- Transporting of the gearbox to our workingshop.
- Performing of the repair constructions.
The Netherlands
December 2013
The Netherlands
December 2013
The Netherlands
December 2013
The conversion operations consists of:
- A visual inspection of the gearbox.
- Performing of the repair constructions.
- Vibration measurement, probably damages at the bearings of the output shaft.
The Netherlands
December 2013
- Performing of the repair constructions.
- Controlling the gearings for bursts by means of magnafluxing.
FLENDER PEAC 4280,6
The Netherlands
January 2014
- Performing of the repair constructions.
- Renewing of all seals and bearings.
- Renewing of the output shaft.
ZPMC TB220.13.D1B-00
The Netherlands
January 2014
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
ZPMC FH1230.24.A1B-00
The Netherlands
January 2014
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
FLENDER KBH 400/S/So
The Netherlands
January 2014
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
PHB KSZg 355 Pu
The Netherlands
January 2014
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
FLENDER KBH 400/S/So
The Netherlands
January 2014
- Performing of the repair constructions.
- Construction of the Malmedie coupling.
DEMAG 200 ZW/KR
The Netherlands
January 2014
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
FLENDER Sonder 195
The Netherlands
January 2014
- Deploying of the inspection report.
- Stop point.
LIPS FT09
The Netherlands
January 2014
to degrease and to conserve in the excisting colour.
- Outside box was in poor condition.
WGW SC 1,5/SO
The Netherlands
January 2014
to degrease and to conserve in the excisting colour.
WGW SC 1,5/SO
The Netherlands
January 2014
- Renewing of all seals and bearings.
- Renewing of various consumables such as gaskets and mounting hardware.
- Re-assembling of the gearbox.
FLENDER KADS 160-K
The Netherlands
January 2014
- Performing of the repair constructions.
- Deploying of the inspection report.
- Stop point.
M.A.N. 08-208
The Netherlands
January 2014
- Modifying of the gearbox.
- Performing of the repair constructions.
- Assembling of the input coupling and output cable drum.
PIV PD31-R10-H14
The Netherlands
January 2014
Our client had a problem with the gearbox RENK SHSI 3S 1000.
We performed:
- Disassembling and inspection.
- We assembled the complete gearbox again and performed a test run.
We performed:
- Disassembling and inspection.
- We assembled the complete gearbox again and performed a test run.
RENK SHSI-3S-1000
The Netherlands
December 2013
This report provides the findings of the exported visual inspection to the gearbox.
The purpose of the inspection is to determine the condition of the gearbox.
REINTJES WAF 5555
The Netherlands
December 2013
The follow instructions were produced at the gearbox:
Disassembling and cleaning of the gearbox.
Inspection of the parts consisting of the following instruction:
PIV PLC18-R11-G11
The Netherlands
December 2013
- Performing of the repair constructions.
- Renewing of the seals and bearings.
- Re-assembling of the gearbox.
WGW KSHK 1330 S/So
The Netherlands
December 2013
- Performing of the repair constructions.
- Renewing og all seals, bearings and innerrings.
- Renewing of diverse small items such as gaskets and bolts.
KUMERA TNC34002BX504-125
The Netherlands
December 2013
The follow instructions were produced at the gearbox:
Disassembling and cleaning of the gearbox.
Inspection of the parts consisting of the following instruction:
CONRAD STORK 2x 2R630
The Netherlands
December 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
FLENDER ZF148K-IEC250
The Netherlands
December 2013
- Transporting of the gearbox to our workingshop.
- Performing of the repair constructions.
FLENDER ZF148K-IEC250
The Netherlands
December 2013
The follow instructions were produced at the gearbox:
Disassembling and cleaning of the gearbox.
Inspection of the parts consisting of the following instruction:
HANSEN PHF23-BRN-12,5
The Netherlands
December 2013
The follow instructions were produced at the gearbox:
Disassembling, cleaning and inspection of the gearbox.
Inspection of the parts consisting of the following instruction:
PIV LB180-12H
The Netherlands
December 2013
- Performing of the repair constructions.
- Vibration measurement, probably damages at the bearings of the output shaft.
WGW AA-SCZ-600-2-S
The Netherlands
December 2013