Global Activities
Our activities Europe
Update 22-08-2011
Here below are shown some of the countries in which we have worked:
Projects last 6 months
Projects more then 6 months
Projects in progress NOW
The list below shows a selection of the projects we have done, except projects in The Netherlands and Belgium, sorted by country:
The follow instructions were produced at the gearbox:
The Netherlands
April 2013
The follow instructions were produced at the gearbox:
The Netherlands
April 2013
The Netherlands
March 2013
The follow instructions were produced at the gearbox:
The Netherlands
March 2013
The conversion operations consists of:
- A visual inspection of the gearbox with the aid of a videoscope through the inspection cover.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
March 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
March 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
January 2013
The conversion operations consists of:
- Disassembling of the gearbox.
- Equalizing of the spur bevel gear.
- Performing of the repair constructions.
The Netherlands
January 2013
The conversion operations consists of:
- Disassembling of the PTO shaft out of the gearbox.
- Transporting the gearbox to our workshop.
- Renewing of the bearings.
The Netherlands
December 2012
The conversion operations consists of:
- Disassembling of the gearbox.
- Inspection and revision of the gearbox.
- Renewing of the complete inside box.
The Netherlands
November 2012
The conversion operations consists of:
- Disassembling of the gearbox.
- Inspection and revision of the gearbox.
- Renewing of the complete inside box.
The Netherlands
November 2012
The conversion operations consists of:
- Revision on the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
November 2012
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
October 2012
The Netherlands
October 2012
The conversion operations consists of:
- Inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
September 2012
The Netherlands
August 2011
The Netherlands
June 2011
The Netherlands
October 2010
The Netherlands
October 2010
The Netherlands
September 2010
The Netherlands
August 2010
The Netherlands
July 2010
The Netherlands
July 2010
The Netherlands
May 2010
The Netherlands
May 2010
- Disassembling, cleaning, visual inspection and assembling. Test run with report.
- Renewing of various consumables such as gaskets and mounting hardware.
- Re-assembling of the gearbox.
ZPMC FB515.916.D1A-00
The Netherlands
April 2013
- Disassembling, cleaning, visual inspection and assembling. Test run with report.
- Renewing of all seals and bearings.
- Renewing of various consumables such as gaskets and mounting hardware.
ZPMC FB515.916.D1A-00
The Netherlands
April 2013
This presents the findings of the visual inspection, vibration analysis and shaft
alignment check, performed on the generator gearbox of Asug. For the
inspection of the gears and bearings of the gearbox, a videoscope was used.
Clear images can be viewed and recorded by a videoscope at locations with
limited accessibility.
alignment check, performed on the generator gearbox of Asug. For the
inspection of the gears and bearings of the gearbox, a videoscope was used.
Clear images can be viewed and recorded by a videoscope at locations with
limited accessibility.
ASUG STG-2-900
The Netherlands
March 2013
- Disassembling, cleaning, visual inspection and assembling. Test run with report.
- Renewing of various consumables such as gaskets and mounting hardware.
- Renewing of spur bevel gear set.
- Renewing of the pinion shaft.
FLENDER KBH 400/S/So
The Netherlands
March 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
FLENDER H2-SV-7B
The Netherlands
March 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
FLENDER FZAZ148 G180M4 L400
The Netherlands
March 2013
- Deploying of the inspection report.
- Stop point.
HANSEN 536
The Netherlands
January 2013
- Equalizing of the spur bevel gear.
- Performing of the repair constructions.
GSM UNKNOWN
The Netherlands
January 2013
- Transporting the gearbox to our workshop.
- Renewing of the bearings.
REINTJES WAF-5555
The Netherlands
December 2012
- Inspection and revision of the gearbox.
- Renewing of the complete inside box.
RADEMAKERS CSCF-100
The Netherlands
November 2012
- Inspection and revision of the gearbox.
- Renewing of the complete inside box.
RADEMAKERS CSCF-100
The Netherlands
November 2012
- Performing of the repair constructions.
- Deploying of the inspection report.
MARLEY UNKNOWN
The Netherlands
November 2012
- Performing of the repair constructions.
- Deploying of the inspection report.
REGGIANA PLANETARY GEARB WGF
The Netherlands
October 2012
We performed an inspection and revision on gearbox HYOSUNG 440-KIPS-SPH80.
The conversion operations consists of:
- Disassembling of the forwardbox.
- Performing of the repair constructions.
- Disassembling and cleaning of the planetary gearbox.
- Renewing of the output shaft bearing.
- Performing of the repair constructions.
- Disassembling and cleaning of the planetary gearbox.
- Renewing of the output shaft bearing.
HYOSUNG 440-KIPS-SPH80
The Netherlands
October 2012
- Performing of the repair constructions.
- Deploying of the inspection report.
REINTJES WAF-5555
The Netherlands
September 2012
Our work:
We first disassembled gearbox Lohmann & Stolterfoht onsite.
It was necessary to make a visual inspection, so we transported it to our workshop.
We performed a visual inspection with our endoscope.
All our findings were reported in an inspection report for our client.
We first disassembled gearbox Lohmann & Stolterfoht onsite.
It was necessary to make a visual inspection, so we transported it to our workshop.
We performed a visual inspection with our endoscope.
All our findings were reported in an inspection report for our client.
LOHMANN & STOLTERFOHT PLANETAIRE
The Netherlands
August 2011
Disassembly, cleaning and inspection of gearbox. Preparing an inspection report and preform overhaul of gearbox.
MARLEY 22.2
The Netherlands
June 2011
- Disassembling, cleaning and inspection on gearbox SCHARPEGGE-394470.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
SCHARPEGGE 3944700
The Netherlands
October 2010
- Removing, cleaning and inspecting the gearbox.
- Repair of the gearbox and testrun.
- Repair of the gearbox and testrun.
BHS TG 28
The Netherlands
October 2010
- Full inspection of damaged gearbox.
- Complete repair of this gearbox including test run.
- Complete repair of this gearbox including test run.
BIERENS 26 Spec
The Netherlands
September 2010
- Disassembling, cleaning and inspection on gearbox ZAE-90.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
ZAE 90-1049-1-M
The Netherlands
August 2010
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
RHENANIA 99436760
The Netherlands
July 2010
- Disassembling, cleaning and inspection on gearbox RHENANIA-NPS-80-SG.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
RHENANIA Nps 80 Sg
The Netherlands
July 2010
- Disassembling, cleaning and inspection on gearbox RHENANIA-ALN-ps36.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
RHENANIA ALN ps36
The Netherlands
May 2010
-Disassembling, cleaning and inspection on gearbox RHENANIA-ALNps-60-Sond-360.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
RHENANIA ALNps 60 Sond 360
The Netherlands
May 2010