Global Activities
Our activities in Belgium
On this page you will find a selection of the projects we have done in Belgium. Since Belgium is only a few hours away from our headquarters in The Netherlands, we have done a lot of projects in this country. By clicking on one of the links below you can view the details of the project.
Belgium
December 2011
Belgium
December 2011
Belgium
November 2011
Belgium
November 2011
Belgium
October 2011
Belgium
August 2011
Belgium
August 2011
Belgium
August 2011
Belgium
March 2011
Belgium
March 2011
Belgium
February 2011
Belgium
February 2011
Belgium
February 2011
Belgium
January 2011
Belgium
December 2010
Belgium
October 2010
Belgium
August 2010
Belgium
July 2010
Belgium
June 2010
Belgium
June 2010
Belgium
June 2010
Belgium
June 2010
Belgium
May 2010
Belgium
May 2010
Belgium
April 2010
Performing a test run with a test run report on gearbox Bierens AB-36,5 spec.
BIERENS AB-36,5 spec.
Belgium
December 2011
Disassembling and cleaning of gearbox SEW RF100-L6200.
Renewed all of the bearings and sealings.
We also checked and renewed small parts of the gearbox, like
the mountings. At the end we performed a last test run, before
the gearbox will be delivered at our client.
Renewed all of the bearings and sealings.
We also checked and renewed small parts of the gearbox, like
the mountings. At the end we performed a last test run, before
the gearbox will be delivered at our client.
SEW RF100-L6200
Belgium
December 2011
Inspection on gearbox Hansen QVRF2-CUN-11,2.
Disassembling of the gearbox.
Renewed all of the bearings and sealings.
Assembling the gearbox.
Performing a test run.
Disassembling of the gearbox.
Renewed all of the bearings and sealings.
Assembling the gearbox.
Performing a test run.
HANSEN QVRF2-CUN-11,2
Belgium
November 2011
Performing a visual inspection on gearbox Keller.
The visual inspection was performed with our endoscope.
Making the inspection report for our client.
The visual inspection was performed with our endoscope.
Making the inspection report for our client.
KELLER S 2 S III H500
Belgium
November 2011
Performing:
- Disassembling, cleaning and inspection on gearbox BIERENS-K2A3-80.
- Making a complete inspection report.
- Disassembling, cleaning and inspection on gearbox BIERENS-K2A3-80.
- Making a complete inspection report.
BIERENS K2A3-80
Belgium
October 2011
Performing a visual inspection on gearbox DEMAG HVK32-2.
DEMAG HVK32-2
Belgium
August 2011
Performing an overhaul of two pieces gearboxes.
Overhaul includes:
- Disassembling and cleaning all of the parts.
- Inspection and reporting.
- Assembling and performing a test run with test run report.
Overhaul includes:
- Disassembling and cleaning all of the parts.
- Inspection and reporting.
- Assembling and performing a test run with test run report.
DEMAG 5213
Belgium
August 2011
- Disassembling
- Cleaning and inspecting
- Performing an inspection report.
- Cleaning and inspecting
- Performing an inspection report.
FALK 203772-S
Belgium
August 2011
- Disassembling, cleaning and inspection on gearbox Flender SKBA-90.
- Reporting and making a revision proposal.
- Assembling revision accordingn to revision proposal.
- Performing a test run with a test run report.
- Reporting and making a revision proposal.
- Assembling revision accordingn to revision proposal.
- Performing a test run with a test run report.
FLENDER SKBA 900
Belgium
March 2011
- Gearbox show a heightened level of vibration TPV the teeth.
- Inspection in 2 days
- Performing: - Gearbox after entry immediately disassembled and inspected
- Any damage capturing by pictures
- Drawing up a complete inspection-report
- Stop Point.
- Inspection in 2 days
- Performing: - Gearbox after entry immediately disassembled and inspected
- Any damage capturing by pictures
- Drawing up a complete inspection-report
- Stop Point.
BHS RP32 DSU32
Belgium
March 2011
- Performing an inspection on gearbox Flender DSE-2.95
- Analyzing and reporting.
- Giving advice to our client by performing disassembling.
- Analyzing and reporting.
- Giving advice to our client by performing disassembling.
FLENDER DSE 2.95
Belgium
February 2011
- Disassembling, cleaning and visual inspection on gearbox SANTASALO-2C355-EY2.
- Reporting and making a revision proposal.
- Assembling revision according to revision proposal.
- Performing a test run with a test run report.
- Reporting and making a revision proposal.
- Assembling revision according to revision proposal.
- Performing a test run with a test run report.
SANTASALO 2C355 EY2
Belgium
February 2011
Preventive inspection of a Flender Graffenstaden, TX61/1CV, load gearbox. The load gearbox is part of a LM6000 gas turbine driven generator set.
FLENDER GRAFFENSTADEN TX61/1CV
Belgium
February 2011
- Disassembling, cleaning and inspection on gearbox SANTASALO-3TKC280-N.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
- Reporting and making a revision proposal.
- Assembling and revision according to revision proposal.
- Performing a test run with a test run report.
SANTASALO 3TC280 N
Belgium
January 2011
Standard overhaul on gearbox. Disassembling, cleaning,
inspection
of gearbox DEMAG 5213, preparing inspection report and overhaul.
of gearbox DEMAG 5213, preparing inspection report and overhaul.
DEMAG 5213
Belgium
December 2010
- Disassembly, cleaning and inspection of gearbox.
- Preparing inspection report.
- Preparing inspection report.
SEW D100
Belgium
October 2010
Replacement and aligning of gearbox.
WERNER & PFLEIDERER ZSK-92-F-385-E
Belgium
August 2010
For the replacement of one of the bearings in a production line, our customer had to dismount the gearbox. During this dismounting the output shaft was damaged and it was thought that the output bearings in the gearbox were also damaged.
LOHMANN & STOLTERFOHT GPV 235
Belgium
July 2010
The manufacture and supply of a complete new modified gear set for gearbox: brand Falk type 203 772-S.
FALK 203772-S
Belgium
June 2010
Inspection and overhaul of gearbox Chemineer 7-HTN-25.
CHEMINEER 7-HTN-25
Belgium
June 2010
Inspection and overhaul of gearbox EKATO 313 V-H-KB.
EKATO 313 V-H-KB
Belgium
June 2010
Disassembling, cleaning and inspection on gearbox STORD-RS64. Setting up a complete inspection report.
Making a revision proposal. Assembling and revision according to revision proposal.
Making a revision proposal. Assembling and revision according to revision proposal.
STORD RS-64
Belgium
June 2010
- Performing a visual inspection on gearbox.
- Adjusting the alignment of the E-motor and checking.
- Analyzing and reporting.
- Adjusting the alignment of the E-motor and checking.
- Analyzing and reporting.
RENE DE MALZINE 4D800
Belgium
May 2010
- Disassembly, cleaning and inspection of gearbox.
- Preparing inspection report.
- Preparing inspection report.
BONFIGLIOLI UNKNOWN
Belgium
May 2010
- Performing a visual inspection on 4 different types of gearboxes with an endoscope, performing vibration measurements and taking an oil sample for analyses.
- Analyzing and reporting.
- Analyzing and reporting.
BABBINI PB-12
Belgium
April 2010