Global Activities

Performing a visual inspection with our endoscope on gearbox JSW DRS 150.9-LHP.
We disassembled and cleaned this gearbox.
All the damaged parts where renewed.

Performing of a standard overhaul on gearbox SEW FA-107.
This includes disassembling, cleaning and inspection.
When the gearbox is inspected, we assembled it again and
made a test run.

Performing an overhaul on gearbox NF11-BN-2,68.
We renewed the inside of the gearbox.
The overhauling includes:
- Disassembling and cleaning of the gearbox.
- Inspection with report.
- Assembling and test run.

Performing a standard overhaul on gearbox Marley 68-4626A.
A standard overhaul:
- Disassembling.
- Cleaning.
- Inspection.
- Reporting our findings to our client.

Performing:
- Disassembling, cleaning and inspection.
- Repairing of the shafts.
- Assembling of the gearbox.
- Test run with test run report.

Performing a standard overhaul on gearbox Lightnin Serie 70 & 80. This includes:
- Disassembling and cleaning the gearbox.
- Visual inspection for any tears or leaks.
- Checking for the condition of the gears.
- Assembling the gearbox again.

Overhaul on gearbox Lightnin 88S - 75.
Disassembling and cleaning the gearbox.
Visual inspection all of the parts for any tears or damages.

Performing a standard overhaul on gearbox SEW SF-90-EXD.
Our findings were reported to our client.
We renewed all of the bearings and sealings and assembled the gearbox again.
A test run is our final step to check if everything is alright.

- Disassembling, cleaing and inspecting the gearbox.
- Performing a test run and reporting on gearbox Bierens AB-36,5 spec.

On gearbox Brevini ED2800/FE we performed an inspection on location.

Performing:
- Disassembling, cleaning and inspeting gearbox BIERENS-K2-A3-55.
- Setting up a complete inspection report.

- Disassembling, cleaning and inspection on gearbox Brevini ED2800/FE.
- Making an inspection report for our client.

Performing vibration measurement and visual inspection on gearbox CMI / DE MALZINE 500 H2.
Visual inspection was performed with an endoscope.

The gearbox housing was broken of gearbox Flender CDUW 140.
We made a complete new housing and replaced new bearings.

- Disassembling, cleaing and inspecting the gearbox.
- Performing a test run and reporting on gearbox Bierens AB-36,5 spec.

On gearbox TGW 107 we performed and inspection and revision.
We first disassembled and cleaned all of the parts.
After that, we could do our inspection on all of the parts.
Our client was invited to report our findings.
We found that the bearings were damaged, so we had to
repair them. After repairing we were able to perform the test run.

Our engineers performed a visual inspection on gearbox ABB DL SL 1800 S8.
First we disassembled and cleaned the gearbox. Visual
inspection was possible now. All our findings were reported to our client.

- Exchanging 1 piece quadrant coupling with existing quadrant coupling.
- Bores and keyway are machined conform existing quadrant couplings.

We performed a standard overhaul on gearbox Leistritz ZSE-40-HPC-1200.
Renewed all of the bearings and sealings.
(Dis)assembling and alignment onsite.

Inspection of gearbox Lightnin LS-75. Revision according to revision proposal.
Renewed the bearings and sealings.
Assembling of the gearbox.

Performing:
- Disassembling, cleaning and inspection on gearbox DAVID BROWN R5F610.
- Making an inspection report.
- Assembling and revision according revision proposal.
- Performing a test run with a test run report.

We performed:
- A visual inspection with our endoscope onsite.
- Analyzing.
- Reporting onsite.

Performing:
- Disassembling, cleaning and inspection on gearbox BIERENS-K2A3-80. - Making a complete inspection report.

- Disassembling, cleaning and inspection on gearbox Brevini ED2800/FE.
- Making a complete inspection report.

Performing on location:
Exchange and alignment of gearbox Brevini ED 2800.