Our activities in the Dredging Industry
Presentation of our Dredging projects
Here you will find a selection of the gearbox related projects we have done in the Dredging market for clients all over the world. If you want more information about a project, you can click the link to view all the details.
We performed an inspection and repair on a gearbox CONRAD STORK 2R910 S/3 Spec.
The Netherlands
February 2016
We performed an inspection and repair on a gearbox CONRAD STORK RB-355BL S/3.
The Netherlands
February 2016
We performed an inspection and repair on a gearbox CONRAD STORK B3DH8B.
The Netherlands
January 2016
We performed an inspection and repair on a gearbox CONRAD STORK 2R910 S/3 Spec.
The Netherlands
January 2016
Belgium
December 2015
The conversion operations consists of:
- Inspection of the disassembled bow thruster gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
January 2014
The Netherlands
December 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
Norway
December 2013
The conversion operations consists of:
- Disassembling and cleaning of the gearbox.
- Performing of the repair constructions.
- Renewing of the seals and bearings.
The Netherlands
December 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
December 2013
The Netherlands
November 2013
The Netherlands
November 2013
The Netherlands
October 2013
The conversion operations consists of:
- Disassembling of the gearbox.
- Performing of the repair constructions.
- Controlling of cone with propellor.
The Netherlands
October 2013
The conversion operations consists of:
- Inspection of two gearboxes on board.
- Controlling and recording of the alignment of the input and output shaft.
- A visual inspection and friction of the inside gearbox.
The Netherlands
September 2013
The conversion operations consists of:
- Inspection of two gearboxes on board.
- Controlling and recording of the alignment of the input and output shaft.
- A visual inspection and friction of the inside gearbox.
The Netherlands
September 2013
The Netherlands
July 2013
The conversion operations consists of:
- A visual inspection of the gearbox with the aid of a videoscope.
- Deploying of the inspection report.
- Stop point.
The Netherlands
June 2013
Disassembly of the gearbox
Disassembling of the gearbox took 1 day without facing major issues.
Transporting of parts to our workshop
The pinion as well as the bull gear were transported to the workshop of the shipyard.
Hoisting points needed to be welded on the ceiling of the pump motor room.
Singapore
May 2013
The conversion operations consists of:
- A visual inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
Lithuania
April 2013
Belgium
March 2013
The conversion operations consists of:
- Performing of an alignment check on the dredge pump gearbox on location.
For the alignment check, a laser shaft alignment system was used.
With this system, the alignment of equipment can be measured accurately.
- Deploying of the inspection report.
Belgium
February 2013
The conversion operations consists of:
- Performing of an alignment check on the dredge pump gearbox on location.
For the alignment check, a laser shaft alignment system was used.
With this system, the alignment of equipment can be measured accurately.
- Deploying of the inspection report.
Nigeria
January 2013
The Netherlands
December 2012
The Netherlands
November 2012
We performed an inspection and repair on a gearbox CONRAD STORK 2R910 S/3 Spec.
STORK 2R910 S/3 Spec.
The Netherlands
February 2016
We performed an inspection and repair on a gearbox CONRAD STORK RB-355BL S/3.
STORK RB-355BL S/3
The Netherlands
February 2016
We performed an inspection and repair on a gearbox CONRAD STORK B3DH8B.
CONRAD STORK B3DH8B
The Netherlands
January 2016
We performed an inspection and repair on a gearbox CONRAD STORK 2R910 S/3 Spec.
STORK 2R910 S/3 Spec.
The Netherlands
January 2016
GBS Lasercladden
Belgium
December 2015
- Deploying of the inspection report.
- Stop point.
LIPS FT09
The Netherlands
January 2014
Our client had a problem with the gearbox RENK SHSI 3S 1000.
We performed:
- Disassembling and inspection.
- We assembled the complete gearbox again and performed a test run.
We performed:
- Disassembling and inspection.
- We assembled the complete gearbox again and performed a test run.
RENK SHSI-3S-1000
The Netherlands
December 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
HANSEN RLC-23-S
Norway
December 2013
- Performing of the repair constructions.
- Renewing of the seals and bearings.
HANSEN PDC23S-BNN-14,5
The Netherlands
December 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
HANSEN RLD-33-S-BRH-20
The Netherlands
December 2013
Revisionconstruction and supply comprehensive:
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
Gearbox casing:
- A visual inspection of the gearbox casing for bursts.
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
CONRAD STORK 2-RT-800S/3
The Netherlands
November 2013
Revisionconstruction and supply comprehensive:
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
Gearbox casing:
- A visual inspection of the gearbox casing for bursts.
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
CONRAD STORK Ra-450-3S
The Netherlands
November 2013
The follow instructions were produced at the gearbox:
Disassemling and cleaning of the gearbox.
Inspection of the parts consisting of the following instruction:.
Gearbox casing (on board):
- A visual controlling of the gearbox for bursts, where possible.
- A visual controlling of the inside and the outside of the preservation.
- A visual controlling of the inside and the outside of the preservation.
CONRAD STORK RB-450H/3
The Netherlands
October 2013
- Performing of the repair constructions.
- Controlling of cone with propellor.
LIPS FT09-HB
The Netherlands
October 2013
- Controlling and recording of the alignment of the input and output shaft.
- A visual inspection and friction of the inside gearbox.
CONRAD STORK RB-450H/3
The Netherlands
September 2013
- Controlling and recording of the alignment of the input and output shaft.
- A visual inspection and friction of the inside gearbox.
CONRAD STORK 3R-320/Spec
The Netherlands
September 2013
Our client had a problem with the gearbox JAHNEL & KESTERMANN ASU 560.
We performed:
- Disassembling, inspection and cleaning.
- We assembled the complete gearbox again and performed a rest run with a test run report for our client.
We performed:
- Disassembling, inspection and cleaning.
- We assembled the complete gearbox again and performed a rest run with a test run report for our client.
JAHNEL KESTERMANN ASU 560
The Netherlands
July 2013
- Deploying of the inspection report.
- Stop point.
MASSON MMW-5200
The Netherlands
June 2013
Hoisting points needed to be welded on the ceiling of the pump motor room.
FLENDER 401-912-830-022-2
Singapore
May 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
BRUSSELLE M.90-1-0
Lithuania
April 2013
We repaired all seals and bearings and the slow axis of gearbox Lohmann & Stolterfoht GJZ 1323.
The follow instructions were produced at the gearbox:
- Wearing part ring was renewed.
- The toothing of the pinion had sharp borders. These were manual purified.
- The slow axis is renewed.
The follow instructions were produced at the gearbox:
- Wearing part ring was renewed.
- The toothing of the pinion had sharp borders. These were manual purified.
- The slow axis is renewed.
LOHMANN & STOLTERFOHT GJZ-1323
Belgium
March 2013
For the alignment check, a laser shaft alignment system was used.
With this system, the alignment of equipment can be measured accurately.
- Deploying of the inspection report.
RENK NHIU
Belgium
February 2013
For the alignment check, a laser shaft alignment system was used.
With this system, the alignment of equipment can be measured accurately.
- Deploying of the inspection report.
JAHNEL KESTERMANN DP-A1S940-3S-00
Nigeria
January 2013
We performed an inspection in gearbox Jahnel Kestermann.
The teeths were slightly damage so we regrind them.
We did repair the bearings and seals.
The teeths were slightly damage so we regrind them.
We did repair the bearings and seals.
JAHNEL KESTERMANN E420 / 800
The Netherlands
December 2012
- Inspection on gearbox Kuypers 6021-7.
- Installation of this gearbox.
- Test run to check if everything was alright.
- Installation of this gearbox.
- Test run to check if everything was alright.
KUYPERS 6021-7
The Netherlands
November 2012