Our activities in Chemical Industry
Presentation of our projects in the Chemical industry
On this page you will find a selection of gearbox related projects we have done in the chemical industry for clients all over the world. If you want to know more about the project, you can click the link for more information. Pictures are also added to the project page.
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Renewing of all seals and bearings.
Belgium
October 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
Belgium
October 2013
Inside first gear set
- In way of the oil seal, rough-turn at seal location, add chrome to surface and fine-turn.
- The toothing is regrinded minimal.
Belgium
October 2013
The conversion operations consists of:
- A visual inspection of the gearbox on location.
- Deploying of the inspection report.
- Renewing of all seals, bearings and innerrings.
Belgium
October 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
October 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
September 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
September 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
Belgium
September 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
Belgium
September 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
August 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
Belgium
August 2013
Gearbox
- Disassembling, cleaning and inspection of the gearbox.
- Assembling and adjusting of the gearbox.
- Performing of a test run with a report.
The Netherlands
August 2013
The conversion operations consists of:
- Making of a complete new casing.
- Assembling and a test run of the gearbox.
- Conserving the gearbox internally and externally.
The Netherlands
August 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
August 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
July 2013
The conversion operations for additional work:
- Performing of a visual inspection on location.
- Performing of the repair constructions.
- Analysing and deploying of a report.
Belgium
June 2013
The conversion operations for additional work:
- Performing of a visual inspection on location.
- Performing of the repair constructions.
- Analysing and deploying of a report.
Belgium
June 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Deploying of the inspection report.
- Stop point.
The Netherlands
May 2013
The Netherlands
May 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
Belgium
May 2013
Gearbox casing
- We had to rebush one drilling.
- Inside box was in poor condition, we had to scrape, to polish, to degrease
and to conserve in the excisting colour.
- Outside box was in poor condition.
The Netherlands
April 2013
The conversion operations consists of:
- Disassembling, cleaning and inspection of the gearbox.
- Performing of the repair constructions.
- Controlling of the serrations and the output for bursts.
The Netherlands
April 2013
The conversion operations consists of:
- A visual inspection of the gearbox with the aid of a videoscope through the inspection cover.
- Performing of the repair constructions.
- Deploying of the inspection report.
The Netherlands
March 2013
The conversion operations consists of:
- Performing of an inspection and a vibration measurement of the gearbox.
- Performing of the repair constructions.
- Deploying of the inspection report.
Belgium
February 2013
The conversion operations consists of:
- Performing of a visual inspection of the gearbox with the aid of a videoscope on location.
- Analysing and deploying of the inspection report.
Belgium
January 2013
- Performing of the repair constructions.
- Renewing of all seals and bearings.
HANSEN RNF24-BNN-12,5
Belgium
October 2013
- Deploying of the inspection report.
- Stop point.
LEIPZIG GMBH 06-1434-03800-ESL
Belgium
October 2013
- The toothing is regrinded minimal.
HANSEN RNF24-BNN-12,5
Belgium
October 2013
- Deploying of the inspection report.
- Renewing of all seals, bearings and innerrings.
ABB HXR-450LH2
Belgium
October 2013
- Deploying of the inspection report.
- Stop point.
HANSEN OR1001447-QVRB2L-CUN
The Netherlands
October 2013
- Deploying of the inspection report.
- Stop point.
PHILADELPHIA 3420-CT
The Netherlands
September 2013
- Deploying of the inspection report.
- Stop point.
REXNORD SPRN84C18U-G-280-L-5
The Netherlands
September 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
FRIEDRICH UE30S
Belgium
September 2013
- Deploying of the inspection report.
- Stop point.
HANSEN 811-AN
Belgium
September 2013
- Deploying of the inspection report.
- Stop point.
M.A.N. 08-208
The Netherlands
August 2013
- Deploying of the inspection report.
- Stop point.
SEW RM-107-AM-00
Belgium
August 2013
- Assembling and adjusting of the gearbox.
- Performing of a test run with a report.
WGW KCN 140
The Netherlands
August 2013
- Assembling and a test run of the gearbox.
- Conserving the gearbox internally and externally.
BHS TG-28
The Netherlands
August 2013
- Deploying of the inspection report.
- Stop point.
FLENDER FZAF108B
The Netherlands
August 2013
- Deploying of the inspection report.
- Stop point.
GRAESSNER GR. 60L
The Netherlands
July 2013
- Performing of the repair constructions.
- Analysing and deploying of a report.
ABB FAN-DPSL.1800.S8
Belgium
June 2013
- Performing of the repair constructions.
- Analysing and deploying of a report.
ABB DMG-250
Belgium
June 2013
- Deploying of the inspection report.
- Stop point.
TGW NK SCN 180
The Netherlands
May 2013
Revisionconstruction and supply comprehensive:
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
Gearbox casing:
- A visual inspection of the gearbox casing for bursts.
- Disassembling and cleaning of the gearbox.
- Inspection of all parts of the gearbox:
AMARILLO S-750
The Netherlands
May 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
LIGHTNIN LS-75
Belgium
May 2013
- Inside box was in poor condition, we had to scrape, to polish, to degrease
and to conserve in the excisting colour.
- Outside box was in poor condition.
BIERENS KA55-35
The Netherlands
April 2013
- Performing of the repair constructions.
- Controlling of the serrations and the output for bursts.
BUSS G-160
The Netherlands
April 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
FLENDER H2-SV-7B
The Netherlands
March 2013
- Performing of the repair constructions.
- Deploying of the inspection report.
TGW 107
Belgium
February 2013
- Analysing and deploying of the inspection report.
JSW GP450T
Belgium
January 2013