Inspection and repair service on ZPMC FH1200.24.A1B gearbox

Scope of work:

We performed an inspection and repair on a gearbox ZPMC FH1200.24.A1B.

A customer from Netherlands contacted us about this ZPMC FH1200.24.A1B gearbox. We inspected the gearbox and did a total overhaul. After the revision was succesfully done, we did a test and prepared the gear unit to be shipped back to this client.

Scope of work:

- Pre-organizing the required tools, including gas and oxygen bottles for dismantling, reassembling the input clutch / brake disc and sprocket
- Renting a hoisting frame for the safe lifting of gas and oxygen bottles
- The electrical protection of the installation is provided by the customer
- Pre-checking and recording of the 1x E-motor alignment on 1 side
- The brake cylinder is removed by the customer
- Disassembly of 1x clutch / brake disc and 1x sprocket for the input shaft
- Disassembly of the bearing covers for the input shaft, both sides
- Checking and measuring the axial play of the input shaft
- Adjusting the bearing covers in our workshop
- Visual inspection and reporting of the inside of the gearbox
- Re-assemble the bearing covers for the input shaft, both sides
- Reassembly of 1x clutch / brake disc and 1x sprocket for the input shaft
- The reassembly of the brake cylinder is handled by the customer
- Re-aligning 1x E-motors and recording
- The electrical connection of the installation is provided by the customer
- Leaving the workplace clean.