Inspection and repair of Knödler FZ600.2-280

We got this Knödler FZ600.2-280 gearbox in our shop in The Netherlands. After a thorough inspection, we did a total overhaul and test run. After our review divison was finished, we shippen the gearbox back to the client.

The wor consisted of:

Remove and clean the gearbox completely

Inspecting the components consisting of:

Wardrobe:

Checking visually of the cupboard housing for cracks, where possible
Checking the preservation internally and externally visually
Checking the bores for damage and dimensions
Checking the bores for alignment deviations on the boring machine
Checking the flatness (fitting) of the dividing surfaces
Inside:

Checking the condition of the teeth of all gear transmissions
Checking the bearings for damage phenomena
Checking bearing images and flank play of all gear transmissions
Checking the axle dimensions at.p.v. the bearings, oil seals, gears and couplings on dimensions and damage
Checking the axes for swing. - Checking the teeth for cracks by means of Magnafluxing
Checking the nitrated parts for cracks by means of Magnafluxing