Inspection and repair on FLENDER SDA160 gearbox

This client from Belgium came to us with this FLENDER SDA160. We inspected the gearbox and performed a repair. After a succesful testrun we shipped the gearbox back to the client.

Scope of work:

- Visually check the cabinet for cracks, where possible.
- Visually checking the preservation internally and externally.
- Checking the holes for damage and dimensions.
- Checking the drillings for alignment deviations on the boring bench.
- Checking the flatness (fit) of the division planes

- Checking condition of the toothing of all gear transmissions
- Checking the bearings for damage phenomena.
- Checking bearing images and flank clearance of all gear transmissions.
- Checking the shaft sizes for the bearings, oil seals, gears and couplings on dimensions and damage.
- Checking the axles for sway.
- Checking the toothing for cracks by means of Magnaflux.
- Checking the nitrated parts for cracks by means of Magnaflux.

- Disassembly, cleaning and inspection of the piping, oil pump, cooler and other parts.
- Rinsing the piping and possibly pressing the cooler for tightness