Inspection and repair project of FLENDER H3-SH-14 gearbox

GBS International got this FLENDER H3-SH-14 gearbox in our workshop in The Netherlands. After inspecting the gearbox, we did a complete overhaul and testing. After our review department was done, we send the gear unit back to our client.

Completely disassemble and clean the gearbox we collect.
Inspecting the components consisting of:
v
Wardrobe:
- Visual inspection of the cabinet housing for cracks, where possible.
- Visually checking the preservation internally and externally.
- Checking the bores for damage and dimensions.
- Checking the flatness (fitting) of the dividing surfaces.

Inside:

- Checking the condition of the teeth of all gear transmissions.
- Checking the bearings for damage symptoms.
- Checking bearing images and flank play of all gear transmissions.
- Checking the axle dimensions at.p.v. the bearings, oil seals and couplings on dimensions and damage.