Inspection and repair on FLENDER 118-F-11000 gearbox

This client from Belgium came to us with this FLENDER 118-F-11000. We inspected the gearbox and performed a repair. After a succesful testrun we shipped the gearbox back to the client.

After disassembling the gearbox, all parts that would not be replaced were visually inspected and cleaned. The work performed on the returned parts are:

- All bearings that could be reused are cleaned and rinsed
- All teeth are manually checked and if necessary deburred
- Oil lines have been cleaned and flushed
- All bolts and threaded holes have been assembled and cleaned
- Surfaces are manually checked and if updated
- Side clearances have been checked
- Axial clearances re-adjusted if necessary
- Axial adjustment axes, including set on time
- Blueprints checked of the teeth
- Gearbox removed and trial run